It should be noted that the simplicity of laying is distinguished by the laminate coatings for the floor. As a result of the exact factory processing, laminated boards can be mounted due to locking fastening. Extremely tightly adjacent, laminated boards form an outwardly almost monolithic and seamless coating. Laminate can be used in any room, with the exception of the bathroom.
The laying order
The floating method of attaching laminated boards involves not gluing the material to the floor, since due to compressions and extensions caused by temperature changes, the internal voltage inside each laminated board can lead to cracks. The connection of the lamellas is carried out by the fact that the “protrusion” enters the “groove”.
The styling specialist first mark the object in length and the subsequent laying of the 1st row at an 8-mi-mi-milemma distance from the surface of the wall. To observe this distance helps pegs. So, at the place of contact of the floor with the wall, the nail should be driven. In a similar way, the 1st row at the wall opposite is laid.
Help to observe a straight line in the process of laying laminated boards, holding a guideline to the edge of carefully fitted parts of the laminate, and pulling the thread will help. When laying the first row, the leakels are sent to the wall. So, after trying on, you can start spreading the gasket, as the work is performed, you need to cover the rest of the surface – in order to avoid displacement of the decorated sheets used. Gaskets come from cardboard, natural traffic jams, felt or synthetic winterizer and serve as a good soundproofing agent.
Next, the glue is applied to the boards with the subsequent attachment of the ledge of the next segment, and so on until the end of laying the first row. Keeping equal to the thread, adjust the deviations by raising or lowering pre -established wedges. About an hour later, when the glue dries, you can start laying the 2nd row. A half -meter distance must be observed between the docking seams of the two neighboring rows.
When installing, you should make a 5-type overlap, which is planted on the glue with a reliable dotted amount. In the boards laid near the pipes, rounded cutouts are made – this is necessary to give the coating of aesthetic appearance. Some difficulties may cause laying the last lamella.
Before laying the penultimate board, it is necessary to carefully measure the distance between it and the wall.
Thanks to modern technologies, the production of the laminate allows you to cover interesting drawings and shades, matte and glossy.
High -class professionals. You need a primary school tutor at an optimal price. Visit Pomogatel
