Each of you can fall into such a situation. Imagine: you came to visit your girlfriend, relax, chat and drink tea, and they stretch you and ask you to install a switch that fell out of your nest with the roots. You immediately have the question “that this is a check, or an attempt to operate”? But in any case, you must be prepared for any turn of events. A real man should be able to do such a trifle as installing a light switch.
In principle, there is nothing complicated in installing the switch. First of all, it is necessary to turn off the switch through which electricity enters the room, so as not to accidentally arrange a short circuit and not suffer from a shock blow. Typically, such chipsters or machines are in an electric pan, which is located on the landing, sometimes in the apartment. Only after make sure that the room can be de -energized to start work.
In order to make a switch installation correctly and for a long time, you must first install a plastic box for the subsequent installation of the switch. For installation of electric boxes, we need a small container for stirring gypsum or alabaster and a narrow spatula. You need to stir a small amount of gypsum in water. After receiving a homogeneous mixture, coat the box in a circle and insert into the nest. Gypsum grabs for several minutes, why you can take a short break.
Now let’s start the installation of the switch itself. First you need to disassemble it, that is, remove the keys and a decorative bar from it. The keys can be filled up with a thin screwdriver and removed, then you will open a screw that holds a decorative bar, unscrewing which will be removed and the bar and the bar. Here you will open all the inside of the switch. Before installation, you need to relax the spacer legs, unscrewing the screws that hold them, but not to the end, but so that the paws would press against the switch. Then you need to insert the wires into your places one at a time and fix it with a screwdriver and insert the switch to the place by pressing it with spark paws using the same screwdriver in an electric box. After making sure of the reliability of the switch mounting, you can fasten the decorative bar in place and insert the keys. Now you need to turn on the switch that you turned off and make sure that everything is done correctly and it works properly.
When I am interested in where to ask a lawyer online for free and around the clock, then quick legal advice to citizens are provided on the Biznec-Info website. Here you can consult both an individual and a legal entity on any issue for free.
You can skip reading the entries and leave a comment. Link placement is prohibited.
