Currently, in residential premises of the floor flooring, many owners use polyhlorvinyl.
Its installation is carried out in several stages. Before proceeding to the flooring of a polyhlorvinyl coating on the floor of ceramic tiles or a monolithic concrete floor, the base must be cleaned of oil spots and sand and rinse with hot water with soda, and then rinse with clean water and dry out with clean water.
After which mastic is applied. It is worth noting that only special polymer -cement mastic, which has a small filler, and also use mastic, which is based on synthetic resins, is used to fill out different depressions at the base.
In the case when the concrete is dry, for surface alignment, a gypsum with a broken chalk is sometimes used, which is divorced on a glue solution per one hundred grams of glue per liter of water, or an rubber -cement mastic is used, which includes fifty percent of a white rubber solution and five sifted cement. Mastic is applied with a spatula.
Having dealt with the views and proper installation of mastic, you should continue to install a polychlorvinyl coating.
Laying polyhlorvinyl coating
In the case when there is a warm floor, on a concrete base for rolled coatings, wood -fiber slabs are glued with bitumen, which the loan of cash helps on the day of circulation helps. Such a consumer loan saves in many situations.
When there is an old wooden floor in the room, it should be thoroughly washed in the same way that is indicated above and dryly dry. The separated boards should be beaten with nails and knocked together with bent nails. With an uneven floor, the boards are turned over and opened with a shirt. The holes remaining from the fallen knots should be plugged with corks made of wood, coating them with glue.
It is imperative to ensure that drops of moisture do not remain in the pores of wood, since this will negatively affect the polyhlorvinyl coating – there will be swelling and cracks.
You can not use gas washing gasoline, because the polyhlorvinyl will stretch out, soften and, as a result, waves may form.
Similar materials:
The tree has one of the “interesting properties”, namely, over time, it lends itself to drying and parquet, which is made of it, also suffers from Usushka.
When caring for parquet, they use different materials – in particular, parquet varnishes and oils, although there are also special products that impede the wear of the coating, provide
Parquet in the interior is one of the most environmentally friendly and beautiful flooring.
Long -term operation of plank floors combined with improper care of them leads to wear of the boards.
